Fast Curing Epoxy Ahesive for Household, Workshop, Industry

Easy to use, clean & economical

Waterproof and chemically resistant

Bonds most material to themselves or to one another, especially metal, wood, glass, ceramics, rigid plastic concrete.

 

1. Make sure the surfaces to be joined are clean, dry and free from grease. Roughen smooth, glossy surfaces.

2. Dispense equal parts by pressing down on plunger.

3. Seal the nozzles with the cap located in the plunger handle. Store upright.

4. Mix thoroughly and use within 5 minutes (18~24℃ room temperature.)

5. Apply mix to both joint surfaces.

6. Assemble parts and hold together with clamps, tape, strings or weights, etc. for 10-15 minutes.

 

Allow rapid to set fully at room temperature. The joint will support loads agter 3 hours. Full strength after 8 hours. Cures slowly at temperatures down to 5℃.

Sealed with the cap located in the plunger handle after use. Store in cool, dry place.

 

May cause sensiltization by skin contact. Avoid eye and skin contact. Wash hands with warm water and soap