ALEKO 433MHz Backlight Wireless Keypad Universal Remote Control Switch For ALEKO Gate Door Access

or 6 weekly interest-free payments from $13.71 with Laybuy

$82.26 AUD

Estimated delivery between 2024/04/02 - 2024/04/09
Add to Wishlist
Add to Wishlist
SKU: C122-1307116 Category:

Description

Specifications: 
Model KP-01
Color Black / Blue
Material
Plastic
Size 85×75×35mm / 3.3x3x1.4″
Power
6VDC 2 CR2032 (230mAh) lithium batteries
Battery life About 2 years, 10 times a day
Working frequency 433.92 MHz +/-75KH
Emission power About 1mW
Encoding format
HCS101 standard format
Working temperature -10~+55 C
Digit number 0 to 8 bits
Launch distance Open Distance 200 meters; indoor distance 35 meters
Protection grade IP54
 
Product description:
 
-This is a dual channel transmitters that are activated only after having entered a Suitable combination.-The units are designed for installation in indoor or outdoor locations that ensures the utmost security because the transmitted code      is changed at each transmission session. 
-The estimated transmission range is 200 m in open space and 35 m indoors 
-The units are designed to ensure battery life equivalent to an estimated 2 years of operation considering 10 transmissions/day

Installation: 
-Before physically installing the it in their mouning position it is good practice to perform a practical test to assess their functionality   and effective range.-Consider that range may be up to 25 or 30% less when battery power is low 
 
positioning: 
-Apart from the distance from the receiver, the units should not be positioned in the vicinity of or-worsestill-in contact with metal   structures, which could otherwise exert a signal shielding effect. Thanks to the enclosure protection rating of IP 54, the digital   selectors can be installed outdoors if required.

Audible signal status: 
-1 short beep
-Keypad tone
-1 long beep
-Modification of combination confirmed (or send the signal after enter the correct password )
-5 short beeps
-Error during combination input or combination edit operation
-2 low beeps
-Battery low warning signal New batteries required
Method of use 
-The use of the keypad is based on “combinations”, i.e. numbers of from 1 to 9 digits that the user is required to key in by means of       the keys.Once the combination has been entered the user then presses confirm key3 or 4 to transmit the activation command
 to respectively. 
-Receiver channel 1 if the user presses3 
-Receiver channel 2 if the user presses4-The command will be transmitted only when a valid combination has been entered ,if an incorrect combination has been entered the    selector will emit an error, warning signalwhen the confirom key is pressed -The combination entered must be exact,if, for example:the correct combination is 0422, the following attempts will be interpreted          as errors:422,10422, 04222 
Therefore, if the user inadvertently presses the wrong key,when entering a combination, combination key3 or 4 should be pressed        immedliately to generate the error tone,after which the correct combination can be entered starting from the beginning again
-While entering the combination no more than 6 seconds can be allowed to elapse between keystrokes,after which interval the              combination must be re-entered starting from the beginning.  -The units are factory programmed with a standard combination to activate channel one and a standar combination for channel two

The factory set combinations are as follows:
 
-1a combination to transmit the code associated with the 3 key 
-When the unit is used for the first time this combination is11
 
-2a combination to transmit the code associated with the 4 key 
-When the unit is used for the first time this combination is 22
 

 

 

Additional information

Weight 0.26 kg
MPN

1307116

COLOR

29 BLUE, 24 BLACK

Reviews

There are no reviews yet.

Be the first to review “ALEKO 433MHz Backlight Wireless Keypad Universal Remote Control Switch For ALEKO Gate Door Access”