TMC2130 V1.1 Stepstick Stepper Motor Driver For SPI Function with Heat Sink for 3D Printer

TMC2130 V1.1 Stepstick Stepper Motor Driver For SPI Function with Heat Sink for 3D Printer

$21.65 AUD

Out of stock

Add to Wishlist
Add to Wishlist

Description

Features:
 
1.Two-phase stepper motor single-phase current 1.2A (peak 2.5A) motor operating current can be adjusted
2.SPI only
3.Subdivided into 256
4.Noiseless operation combined with maximum efficiency and optimal motor torque
5.High-precision sensorless motor load detection
6.Reduce energy consumption by 75%
7.High load drive is not out of step

Specifications:

– Product Name: TMC2130 V1.1 Stepstick Stepper Motor Driver 

– Motor input voltage range: 4.75~46V
– Logic interface input voltage: 3 ~ 5V

– Interface: Step/Dir or SPI
– Configuration:  CFG Pins or SPI
– Native Microsteps*: up to 1/256
– MicroPlyer
– Microsteps: 1/256
– Logic Voltage VIO:  3-5V
– Motor Voltage VM: 5.5-46V
– Motor Phase Current: 1.2A RMS, 2.5A Peak
– VM always needed**: yes
– Internal V- Regulator**: enabled
– RDSon: >=0.5 Ohm
– StealthChop (quiet): yes
– SpreadCycle: yes
– CoolStep: yes
– StallGuard: yes
– 
DcStep: yes


Note:
* Due to different producing batches, product details might be a little different.  Thank you for understanding.

Package Included:

1 x 
TMC2130 V1.1 Stepstick Stepper Motor Driver 

1 x With plastic heat sink
1 x Screwdriver
1 x 4pin connection cable

 
TMC2130 V1.1 Stepstick Stepper Motor Driver For SPI Function with Heat Sink for 3D Printer 7

TMC2130 V1.1 Stepstick Stepper Motor Driver For SPI Function with Heat Sink for 3D Printer 8

TMC2130 V1.1 Stepstick Stepper Motor Driver For SPI Function with Heat Sink for 3D Printer 9

TMC2130 V1.1 Stepstick Stepper Motor Driver For SPI Function with Heat Sink for 3D Printer 10


TMC2130 V1.1 Stepstick Stepper Motor Driver For SPI Function with Heat Sink for 3D Printer 11
TMC2130 V1.1 Stepstick Stepper Motor Driver For SPI Function with Heat Sink for 3D Printer 12
TMC2130 V1.1 Stepstick Stepper Motor Driver For SPI Function with Heat Sink for 3D Printer 13

Reviews

There are no reviews yet.

Be the first to review “TMC2130 V1.1 Stepstick Stepper Motor Driver For SPI Function with Heat Sink for 3D Printer”