PLA Matte Color Matte Lemon Yellow

or 6 weekly interest-free payments from $8.97 with Laybuy

$48.93 AUD

Estimated delivery between 2024/07/16 - 2024/07/23
Add to Wishlist
Add to Wishlist

Description

✔ AMS Compatible

Type: Refill

Size: 1kg

图片加载失败文案

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

图片加载失败文案

Recommended Printing Settings
Drying Settings before Printing 55 °C,8 h
Printing and Keeping Container’s Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 190 – 230 °C
Bed Temperature (with PVP Glue) 35 – 45 °C
Printing Speed < 300 mm/s
Physical Properties
Density 1.31 g/cm³
Vicat Softening Temperature 63 °C
Heat Deflection Temperature 58 °C
Melting Temperature 163 °C
Melt Index 39.4 ± 0.7 g/10 min
Mechanical Properties
Tensile Strength 32 ± 3 MPa
Breaking Elongation Rate 32.8 ± 4.3 %
Bending Modulus 2360 ± 250 MPa
Bending Strength 53 ± 2 MPa
Impact Strength 19.2 ± 3.7 kJ/m²

What’s in the Box:

Filament*1 & Desiccant*1

pla basic

Filament*1 & Desiccant*1

pla basic

Package*1

pla basic

Filament Label*1

pla basic

图片加载失败文案

Instructions for Printed Spool

abs filament

When you’re finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

abs filament

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

abs filament

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

abs filament

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.