Shop

Categories

Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer

$19.62 AUD

or 6 weekly interest-free payments from $3.27 with Laybuy what's this?

Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer

In stock

Optional product install assistance
Estimated delivery between 2021/07/31 - 2021/08/07
Add to Wishlist
Add to Wishlist

Descriptions:

LV8729 driver module with 128 subdivisions is a good choice for Nema stepper motor whose current is less than 1.5A, which makes motor steady, quiet and precise.

Features:

1. In 64 subdivision or 128 subdivision to achieve a better ultra-quiet effect;
2. Operating voltage: 6V-36V, the proposed voltage is 12V;
3. The maximum current is 1.5A, the default is 0.8A;
4. Segament: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128;
5. You must add the heat sink to make the heat dissipation better (please be sure to operate with a large fan to help cooling).

Specifications:

Model: LV8729
Type: stepper motor driver
Size: 1.5mm x 2.0mm
Maximum drive current: 1.8A
Maximum voltage: 36V (usually 12V)
Supported segament: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128
Product craft: four-layer PCB board
Product weight: 5g

Note:


Please make sure the connecting direction is right, or it will probably burn the driver chip and controller board. Recommend to do a good job of cooling for the module.
 
Driver current algorithm and its adjustment:

 
1. Driver current algorithm: i=Vref/0.5, the default Vref about 0.4V, so the default current 0.8A, and maximum current 1.5A
2. Please DO NOT connect the motors when measuring the voltage, or it’s easy to burn the drive.
3. Please connect both the power supply and the USB for power when measuring the voltage.
4. Minor adjustment for potentiometer driver. Adjust it again after measurement to avoid burning driver by excessive current.


5. To increase the current by rotating the potentiometer clockwise slowly, and anticlockwise to reduce.


Package Included:



1x LV8729 Stepper Motor Driver
1x Heat Sink


 



Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 11


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 12


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 13


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 14


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 15


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 16


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 17


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 18


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 19


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 20

Reviews

There are no reviews yet.

Be the first to review “Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer”
Categories

Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer

$19.62 AUD

or 6 weekly interest-free payments from $3.27 with Laybuy what's this?

Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer

In stock

Optional product install assistance
Estimated delivery between 2021/07/31 - 2021/08/07
Add to Wishlist
Add to Wishlist
SKU: 11763 Category: Tags: , , , , , , , , , ,

Descriptions:

LV8729 driver module with 128 subdivisions is a good choice for Nema stepper motor whose current is less than 1.5A, which makes motor steady, quiet and precise.

Features:

1. In 64 subdivision or 128 subdivision to achieve a better ultra-quiet effect;
2. Operating voltage: 6V-36V, the proposed voltage is 12V;
3. The maximum current is 1.5A, the default is 0.8A;
4. Segament: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128;
5. You must add the heat sink to make the heat dissipation better (please be sure to operate with a large fan to help cooling).

Specifications:

Model: LV8729
Type: stepper motor driver
Size: 1.5mm x 2.0mm
Maximum drive current: 1.8A
Maximum voltage: 36V (usually 12V)
Supported segament: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128
Product craft: four-layer PCB board
Product weight: 5g

Note:


Please make sure the connecting direction is right, or it will probably burn the driver chip and controller board. Recommend to do a good job of cooling for the module.
 
Driver current algorithm and its adjustment:

 
1. Driver current algorithm: i=Vref/0.5, the default Vref about 0.4V, so the default current 0.8A, and maximum current 1.5A
2. Please DO NOT connect the motors when measuring the voltage, or it’s easy to burn the drive.
3. Please connect both the power supply and the USB for power when measuring the voltage.
4. Minor adjustment for potentiometer driver. Adjust it again after measurement to avoid burning driver by excessive current.


5. To increase the current by rotating the potentiometer clockwise slowly, and anticlockwise to reduce.


Package Included:



1x LV8729 Stepper Motor Driver
1x Heat Sink


 



Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 31


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 32


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 33


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 34


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 35


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 36


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 37


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 38


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 39


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 40

Reviews

There are no reviews yet.

Be the first to review “Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer”
Categories

Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer

$12.50 AUD

Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer

Out of stock

Add to Wishlist
Add to Wishlist
SKU: 11763 Category: Tags: , , , , , , , , , ,

Descriptions:

LV8729 driver module with 128 subdivisions is a good choice for Nema stepper motor whose current is less than 1.5A, which makes motor steady, quiet and precise.

Features:

1. In 64 subdivision or 128 subdivision to achieve a better ultra-quiet effect;
2. Operating voltage: 6V-36V, the proposed voltage is 12V;
3. The maximum current is 1.5A, the default is 0.8A;
4. Segament: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128;
5. You must add the heat sink to make the heat dissipation better (please be sure to operate with a large fan to help cooling).

Specifications:

Model: LV8729
Type: stepper motor driver
Size: 1.5mm x 2.0mm
Maximum drive current: 1.8A
Maximum voltage: 36V (usually 12V)
Supported segament: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128
Product craft: four-layer PCB board
Product weight: 5g

Note:


Please make sure the connecting direction is right, or it will probably burn the driver chip and controller board. Recommend to do a good job of cooling for the module.
 
Driver current algorithm and its adjustment:

 
1. Driver current algorithm: i=Vref/0.5, the default Vref about 0.4V, so the default current 0.8A, and maximum current 1.5A
2. Please DO NOT connect the motors when measuring the voltage, or it’s easy to burn the drive.
3. Please connect both the power supply and the USB for power when measuring the voltage.
4. Minor adjustment for potentiometer driver. Adjust it again after measurement to avoid burning driver by excessive current.


5. To increase the current by rotating the potentiometer clockwise slowly, and anticlockwise to reduce.


Package Included:



1x LV8729 Stepper Motor Driver
1x Heat Sink


 



Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 51


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 52


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 53


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 54


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 55


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 56


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 57


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 58


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 59


Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer 60

Reviews

There are no reviews yet.

Be the first to review “Ultra-silent 4-layer Substrate MKS-LV8729 Stepper Motor Driver Support 6V-36V With Heatsink For 3D Printer”
DRTL Mobile App

FREE
VIEW