Description
Specifications:
1. Colour: Black
2. Maximum current: 25A (enhanced heat dissipation)
3. Size: about 6 x 5 x 3.1cm
4. Mounting holes: 3.2mm diameter, for M3 screws
3. Size: about 6 x 5 x 3.1cm
4. Mounting holes: 3.2mm diameter, for M3 screws
Features:
–
This module is positioned between the output of the heating bed or extruder and your electronic board as shown in the wiring diagram.
This module is positioned between the output of the heating bed or extruder and your electronic board as shown in the wiring diagram.
–
The white connector cable is provided.
The white connector cable is provided.
– With this additional module, the maximum current on the board can reach 25A.
– This module is recommended if you plan to use a heated bed with a 3D printer that uses a 12V power supply.
– This module is recommended if you plan to use a heated bed with a 3D printer that uses a 12V power supply.
Content:
Simple – 1 MOSFET
– 1 Cable
Double – 2 MOSFET
– 2 Cables
– 2 Nozzles 0.4mm for wire of 1.75mm
Package Included:
1 x
Heated bed power module with cable
Reviews
There are no reviews yet.